Evido EAD-D2000 Manuel télécharger pdf (Page 92)

UART0 : Reserved for the internal debugging purpose with RS232C.

UART1 : RS485 port

UART2 : Reserved for the communication of camera OSD control

IMPORTANT : Only UART1 is available for users but UART0 and UART2 are reserved for

internal communication purpose which are not opened to users.

Note

If you want the RS232C, please use the 485-232 converter.

Refer to the section 4.6.

IO CONFIGURATION for

the explanation of these

setting.

1 2 ... 87 88 89 90 91 92 93 94 95 96

Pas de commentaire

Evido EAD-D2000 Manuel Page 92