Evido EAD-D2000 Manuel télécharger pdf (Page 69)

Step 2. Selecting a recording storage

You can choose one of the recording storage devices, SD card, USB memory, NAS, or FTP. In

case of selecting NAS or FTP, the server and login information must be set. Click on NAS or

FTP to display a setting window.

Step 3. Recycling options

You can choose one of the recycling options when the storage is full of data.

 Stop recording: Stops recording and keep the recoded data.

 Delete files and recycle (oldest first): Replace old files with newly created files. If you

use FTP for a storage device, this option will not be available.

Step 4. File name convention

Type the file name that ends with _YYYYMMDD_hhmmss.avi. For easier recognition of

duplicate files, the end of every recording file name includes the date and time information

as a default. In case of using FTP for the storage option, the feature to overwrite files with

the same file name is supported.

Step 5. Time for recording

The recording time can be scheduled with three different sections in 00:00~24:00 (hh:mm).

Step 6. Stream source setting

You can set the desired resolution, size, and quality of the image for recording. The time

interval supported is from 500ms to minute. If you input 500 for the interval, you may get 1

shot of image recorded for every 500ms.

If you have finished the setting above, click the Apply button to save and apply the setting. To

manually start or stop the recording, click the START and STOP button for Instant recording.

This button activates instant recording without depending on the recording setting rules.

To record VCA event data only, unselect Enable automatic recording shortly after mounting

storage device, and then select Enable automatic recording with VCA event triggering. In this

mode, event data will be recording regardless of the recording schedule setting. All of

configuration is the same as manual recording but optionally, you need set up ‘Event

Recording’ tab.

Step 1. Set the time of post-alarm recording. Then, when VCA event is triggered, the images

will be recorded for the configured time only.

Step 2. Check the box of ‘Enable automatic recording with VCA event triggering’ to enable the

VCA event recording.

Step3. Click the Apply button to save the changes.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 95 96

Pas de commentaire

Evido EAD-D2000 Manuel Page 69