Evido EAD-D2000 Manuel d'utilisateur Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 66
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
CT-CCV6X Intel Atom D2000/N2000 COM Express Type 6 Module
30
Carrier Board of standards such as Smart Battery. The maximum capacitance
on the Carrier Board shall not exceed 100pF.
Signal
I/O
Description
SMB_CK
I/OD
System Management Bus bidirectional clock line
SMB_DAT
I/OD
System Management Bus bidirectional data line
SMB_ALERT#
I
System Management Bus Alert active low input
can be used to generate an SMI# (System
Management Interrupt) or to wake the system.
4.15 ExpressCard
ExpressCard is a small form factor expansion card that uses PCI Express or
USB as the interface. It is similar in concept and scope to CardBus. The
CT-CCV6X supports two Express Card interface.
Signal
I/O
Description
EXCD[0:1]_CPPE#
I
PCI ExpressCard: PCI Express capable card
request, active low, one per card
EXCD[0:1]_PERST#
O
PCI ExpressCard: reset, active low, one per card
4.16 General Purpose Input Output
GPI and GPO pins may be implemented as GPIO (Module specific). GPI and
GPO pins may be implemented as SDIO.
Signal
I/O
Description
GPO[0:3]
O
General purpose output pins. Upon a hardware
reset, these outputs should be low
GPI[0:3]
I
General purpose input pins. Pulled high
internally on the Module.
4.16.1 GPIO Configuration
Output Pin default setting is HIGH.
Pin #
GPIO#
Default Configuration
B63
GPIO7
GPO3
B57
GPIO6
GPO2
B54
GPIO5
GPO1
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Commentaires sur ces manuels

Pas de commentaire