Evido EAD-B1000 Manuel d'utilisateur télécharger pdf (Page 10)

July 24, 2008 4 Digital Broadcaster User Manual v. 3.4 rev. 3421

50000

HTTP/TCP

optional

Website Program Guide

(external schedule)

TelVue highly recommends that customers:

• Place the Digital Broadcaster behind a firewall device to avoid Denial of Service

(DoS)-type attacks or brute force login attempts on the various services.

• Never enable Samba for external access.

Consider locking down remote access to service ports to known IP addresses. For example, if

you would like to access your Digital Broadcaster from home and your flat in Paris, you

could limit remote access via your router firewall to IP sources coming only from those two

locations.

Consult your IT department for standard networking security practices including establishing

a firewall and remote access.

Connection and Power-up Instructions

1. Install the Digital Broadcaster in the equipment rack. Refer to the included server

hardware manual for instructions.

2. Connect AC power to the Digital Broadcaster. In the case of redundant power supply

models of the Digital Broadcaster, connect AC power for each power supply.

3. Connect the video server audio/video outputs to your broadcast network or monitor.

Refer to the diagram that came with your server.

a. B-Series video servers include cables to break out unbalanced audio on RCA.

Video is outputted on BNC.

b. B-Series SDI video servers include cables to break out audio on digital and

balanced audio on XLR. Video is outputted on BNC.

c. B-Series HD-SDI video servers include cables to break audio on digital and

balanced audio XLR. Video is outputted on BNC.

d. B-Server ASI servers include Digital ASI In/Out on BNC connectors.

e. B-Series IPTV servers stream video over the integrated Gigabit Ethernet

connectors.

4. Power on the Digital Broadcaster.

5. After the system and application software have loaded completely (a few minutes),

the default continuity clip begins to play in a loop. The Digital Broadcaster has

successfully booted.

Adding the Digital Broadcaster to Your Network

The Digital Broadcaster ships with default network settings of IP address 1.1.1.1, netmask

255.255.255.0, no default gateway, no DNS servers. Once your TelVue server has been

installed, add it to your network.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Pas de commentaire

Evido EAD-B1000 Manuel d'utilisateur Page 10